MODEL
PELEMAX
www.akatilai.lt
15
4. INSTALLATION
5
6
7
8
9
10
5. Pellet container lid
6. Nut DIN 934 M6
7. Spacer DIN 125 M6
8. Spring spacer DIN 127 M6
9. Bolt DIN 931 M6x16
10. Pellet feeding motor
11. Pellet feeding mechanism
securing bracket
12. Maintenance door
12
11
Supplied pellet feeding mechanism is longer than needed to allow
for a more flexible installation position. When installing the pellet
container follow beforementioned requirements! The auger is placed
inside the pellet feeding pipe and fixated to the feeding motor(10).
Motor, auger and pipe is then secured together(6,7,8,9). Assembled
feeding mechanism is then inserted and secured into the bracket(11).
Depending on the pellet container position it is possible that feeding
mechanism needs shortening. If that is the case shortening is done
on the opposite side of the motor by cutting, maintaining that the
pipe and auger lengths remain equal. Flexible pellet feeding hose is
then connected to the feeding mechanism. If flexible pellet feeding
hose forbids unobstructed opening of the middle door, metal elbow
connection to the rotor could be shortened.
