MODEL
PELEMAX
www.akatilai.lt
4
1. INTRODUCTION
1.1. General information:
Industrial PELEMAX model boilers consist of 5-6 horizontal heat
exchangers resulting in a very high heat exchanger surface area,
allowing to reach burning efficiency of over 90%. PELEMAX boilers
can be used in fully automatic mode to burn pellet fuel or can be
used in semi-automatic mode with non-pellet fuel.
Before connecting the boiler to the heating system carefully read
the
WHOLE
instruction manual and make sure all of the boiler
components and equipment are working as intended.
PELEMAX boilers are designed for industrial use in various buildings.
The boiler belongs to the low-temperature boiler class in which the
average temperature of the heat carrier must not exceed 90°C and
the maximum operating pressure is 0,15 MPa.
The manufacturer reserves the right to make minor changes which
have no significant effect on the quality of the combustion process
and operation of the boiler.
1.2. Standards and rules:
The boiler must be installed and operated in accordance with
the legislation requirements of the country in which it is supplied
to. The boiler must be installed in accordance with the instruction
manual otherwise the manufacturer takes no responsibility and does
not guarantee the proper operation of the boiler.
