94
Main menu - Settings
After calling up the menu you will see
the following display:
The individual items are selected using
the
buttons. The changes to the
current settings can be made using the
buttons or the numeric keypad.
Sleep Timer
You can use the “Sleep Timer” function to set an inactive time period after which the receiver will
automatically switch into “Stand-by” mode. To do this, use the
buttons to select “On”. Exit the
menu using the
button. Now press the
?
button. The receiver now displays a window, in which
you can use the
buttons to select the desired inactive time period for the receiver. After this the
receiver will run quite normally, then at the expiry of the inactive time period that was input, automatically
switch into “Stand-by” mode.
If you do not start inputting the inactive time period within
fi
ve seconds of the window appearing, the
receiver will automatically revert to “Stand-by” mode.
Channel Banner Duration (channel information)
Select here how long the channel information should be displayed after a change of channel. The
options available are 1, 2, 3, 4, 5 or 6 seconds.
Playback Banner Duration (playback information)
Select here how long the playback information should be displayed after a the start of playback. The
options available are 1, 2, 3, 4, 5 or 6 seconds.
Display Volume Bar
Select here whether on changing the volume using the receiver remote control the volume bar should
be displayed on the TV screen (selection: “On”) or should not be displayed (selection: “Off”).
Summary of Contents for UFC 960sw
Page 1: ...Operating Manual English UFC 960sw ...
Page 131: ...131 For your notes ...
