Kathrein UFC 960sw Operating Manual Download

Page: 76 / 132

The submenus are selected using the

buttons and called up using the

button. Use the

buttons to select the submenu items. The settings for the various parameters in the individual

items are made using the

buttons or the numeric keypad.

The main menu and submenus can be exited step-by-step using the

button. Press the

button

to return directly from one of the menus to the TV picture.

Main Menu

The main menu is opened by pressing the

button. The following display appears:

The programme showing on the currently
selected channel always appears in the
top right-hand corner of the main menu.

The selected menus, sub-menus and
items, as well as the parameters to be set,
are each marked in colour.

Always pay attention to
the bar at the bottom of
the on-screen display.
This provides information
about the next action/edit
step.

Summary of Contents for UFC 960sw





































































































































Search results

Summary of Contents for UFC 960sw

Reviews:

Related manuals for UFC 960sw

Brands by name

Popular brands

Kathrein UFC 960sw, Operating Manual

Search results

Summary of Contents for UFC 960sw

Reviews:

Related manuals for UFC 960sw

Brands by name

Popular brands