80
Main menu - Channel search
After calling up the menu you will see
the following display:
The
buttons allow you to select
different sets of parameters for the search.
Start Frequency
Use the
buttons to select the start frequency for the search.
End Frequency
Use the
buttons to select the end frequency for the search.
Channel Search Mode
Use the
buttons to select the type of channels that are to be searched for. You have three options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and a
valid smart card together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the
buttons (On/Off) to select whether a Network Search should be performed. If the “Network
Search On” is selected, the networking of the transmission channels enables additional transmission
channels that have not yet been saved to be located. They are then saved and searched for new channels
in the same way as the existing channels.
If “Network Search Off” is selected, only the factory-set frequency range will be searched.
Once you have performed all the settings, use the
buttons to switch to the “Start Search”
selection
fi
eld and con
fi
rm the start of the searching using the
button.
In this menu you can selective search for
a frequency range for the new channels.
Summary of Contents for UFC 960sw
Page 1: ...Operating Manual English UFC 960sw ...
Page 131: ...131 For your notes ...
