Kathrein UFC 960sw, Operating Manual

Page: 21 / 132

21
Connection and setup
Automatical Manual
You need not input any further data, the receiver
will automatically update the date and time.
Use the numeric keypad or the buttons
to input the correct date. Then use the
buttons to switch to the “Time” fi eld and use the
numeric keypad or the buttons to input
the correct time. Then use the button to
con fi rm your input.
Depending on the desired time setup option (Automatic/Manual) the following display then appears:
When you have completed all settings, press the
$
(green) button, to complete the fi rst installation. If
you have already connected an external hard disk to the rear of your unit, the receiver automatically
displays the message “Set up the archive hard disk” (see next page). If no external hard disk is
connected to your receiver, this completes the
fi rst installation and the receiver goes into TV mode.
Here you can select the channel from which the receiver should obtain the time information. Press the
button to call up a channel list from which you can select the channel you want using the cursor
(
@
) buttons. Con fi rm your selection with the button.
Setup Time now
Press the button.