Kathrein UFC 960sw Operating Manual Download

Page: 11 / 132

Connection and setup

Common Interface for one CA module for
Pay-TV cards *)

Smartcard reader for CONAX 5.0 encrypted
Smartcards *)

Stand-by button (On/Off)

4. TV/R button (switching between TV and

radio mode)

12-character alphanumeric display

6/7. Channel selection buttons

*) CA modules and Smartcards are not included with this product

LED in the front panel display:

The LED lights up:

red

The receiver is in stand-by mode or a recording is running which was started from stand-by
mode (on completion of the recording the receiver will then revert to stand-by mode)

green

The archive hard disk is connected to the receiver and is ready to use (has been set up)

orange

The receiver is in operation and a recording is running (on completion of the recording the
receiver will then not revert to stand-by mode)

Summary of Contents for UFC 960sw





































































































































Search results

Summary of Contents for UFC 960sw

Reviews:

Related manuals for UFC 960sw

Brands by name

Popular brands

Kathrein UFC 960sw, Operating Manual

Search results

Summary of Contents for UFC 960sw

Reviews:

Related manuals for UFC 960sw

Brands by name

Popular brands