Kathrein MSK 130 Instructions For Use Manual Download Page 85

Page: 85 / 100

85 of 100

➯

The following page appears:

21.2

Activating the Watchdog

Under

Main

▶

Unit/Status

, it is possible to activate the

Watchdog

(a monitoring system).

When the monitoring system is activated, the meter restarts as soon as the data transfer
is interrupted.

Note that the user-defined settings are deleted after the meter has been
restarted. To guarantee that the settings are maintained, we recommend turn-
ing the watchdog off (

OFF

setting).

Activating the Watchdog

1. Under

Watchdog

(

①

in the figure above), select the

setting from the drop-down

menu.

2. Click on

Set Watchdog

(

②

in the figure above) to activate the Watchdog.

➯

The meter will automatically restart if the data transfer is interrupted.

Recalling the Watchdog Status

►

Click on

Get Watchdog

(

③

in the figure above) .

➯

The current status of the Watchdog (enabled or disabled) is reported.

Summary of Contents for MSK 130





































































































Search results

Summary of Contents for MSK 130

Reviews:

Related manuals for MSK 130

Brands by name

Popular brands

Kathrein MSK 130, Instructions For Use Manual

Search results

Summary of Contents for MSK 130

Reviews:

Related manuals for MSK 130

Brands by name

Popular brands