Kathrein MSK 130, Instructions For Use Manual, Page: 35 / 100

35 of 100
14.4 Editing CATV Configuration
1
2
3
No. Name Function
①
LNB L. O. Set to 0.0 MHz by default
If the signal frequency is converted into the TV band
(VHF or UHF), it is necessary to set the desired value
before starting the measurement. To do so:
1. Tap
0.0 MHz .
➯
The numeric field appears.
2. Enter the desired value.
3. Tap
ENTER or rotate the navigation wheel and
press it to confirm the value.
Tip
Alternatively, to change the value, you can
press the navigation wheel and rotate it.
②
C/N TYPE is used during analogue TV signal measurements to
evaluate the C/N of the video carrier inside or outside
the signal band; set to
AUTO by default
OUT BAND See
②
p. 30 .
IN BAND See
②
p. 30 .
AUTO The C/N measurement value displayed by
the meter corresponds to the best value
detected between
IN BAND and OUT
BAND .