manualshive.com logo in svg

Kathrein MSK 130, Instructions For Use Manual, Page: 24 / 100

Share
Download
Kathrein MSK 130 Instructions For Use Manual Download Page 24

 

Changing Basic Parameters

24 of 100

6.  Press the navigation wheel to save the selection.

 

➯

The brightness value is saved. The parameter 

BRIGHTNESS

 is active (marked in 

orange).

Tip

To select other menu items and values, take Steps 1 – 6, see 

Changing 

Brightness

.

Tip

You can switch between the volume menu items by using the touch screen 
directly. The value of the menu item is active by default.
1.  Tap a volume menu item.

 

➯

The parameter value is active (marked in orange).

2.  Touch the scale to the right or left of the cursor to increase or decrease the 

value (for 

VOLUME 

and 

BRIGHTNESS

).

or
Tap the parameter value (for all the other parameters)

 

➯

The parameter value changes.

13.3 

VIDEO OUT

It is possible to show the display image on an external monitor.

 

►

Using the supplied video cable, connect the  

Audio Video Out

 port of the signal meter 

to an external monitor.

13.4 

Displaying an Analogue Video Signal

VIDEO IN

 is configured as 

INT

 (internal) by default, which means that the images dis-

played on the meter will be those decoded from the signal at the RF input.
When the meter is set to 

EXT

 (external), it will display the images coming from the com-

posite video input in the measurement interface.
To display an analogue video signal:
1.  Connect an analogue video signal using the cinch connector.
2.  Take Steps 1 – 3 to select 

VIDEO IN

, see 

 Changing Brightness.

 

➯

The parameter 

VIDEO IN

 is active (marked in orange).

3.  Rotate the navigation wheel and select 

EXT

 to display an external analogue video 

signal.

4.  Press the navigation wheel to save the selection.

 

➯

The setting is saved. The parameter 

VIDEO IN

 is active (marked in orange).

Summary of Contents for MSK 130





































































































Reviews:

No comments