77 of 100
20.1.1
SAT SCR
The
Satellite Channel Router
(SCR) is a special LNB with typically four or eight RF outputs
usually used for central installation in buildings enabling the connection of up to eight dif-
ferent receivers (decoders) to the same LNB. Each user (RF output) is assigned a specific
frequency to which the satellite channels will be down converted before being sent to the
receiver (see also
Technical Data, p. 94
).
20.1.2
DUAL LNB
This function enables the user to verify the installation of a Dual LNB satellite antenna
which is either
9°&13°
,
13°& 19°
or
19°&23°
. If the installation type is set to
VARIABLE
, it
is possible to perform the test on several independent plans available in the meter. Once
selected the azimuth couple, the user can assign a specific DiSEqC
TM
command to each
of them before starting the measurement.
Summary of Contents for MSK 130
Page 99: ...99 of 100 ...
