Technical Speci
fi
cation
¹
)
At mid-band
²
)
G/T at 11.3/12.5 GHz under standard ambient conditions (clear sky)
³
)
At a dynamic pressure of 800 N/m² to EN 60728-11
Type
CAS 09
CAS 90
CAS 90/R
Part no.
216083
216224
216262
Diameter
cm
90
90
90
Colour
White
(similar to RAL 9002)
Graphite grey
(similar to RAL 7012)
Auburn
(RAL 8012)
Reception range
GHz
10.70-12.75
Antenna gain at
10.70-11.70 GHz/11.70-12.50 GHz/12.50-12.75 GHz
dBi
38.6/39.2/39.6
Half-power beam width ¹
)
°
< 1.9
Figure of merit ²
)
central feed system
UAS 571/572/584/585
UAS 481
dB/K
18.8/19.8
18.1/19.1
Figure of merit ²
)
feed system spacing 3°-4°
UAS 571/572/584/585
UAS 481
dB/K
18.3/18.3
17.6/18.6
Figure of merit ²
)
feed system spacing 6°
UAS 571/572/584/585
UAS 481
dB/K
17.9/18.7
17.2/18.0
Cross-polarisation decoupling
dB
> 27
Wind load ³
)
N
730
Max. allowable wind speed
km/h
190
Mast clamp range
mm
48-90
Setting range Elevation/Azimuth
°
5-50/360
Dimensions width
mm
987
Dimensions height max.
mm
1030
Dimensions protrusion max.
(from mast centre without feed system)
mm
880
Packing unit dimensions
mm
1050 x 1050 x 230
Weight approx. net/gross
kg
9.3/11.9
All
fi
gures are
typical values!
If the maximum load is
exceeded, parts could
break away!
Electronic equipment is
not domestic waste
in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT
AND THE COUNCIL dated 27
th
January 2003 on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal to an appropriate of
fi
cial collection point.
Warranty conditions for the antenna corrosion resistance
Important instructions relating to the warranty conditions for the
corrosion resistance of Kathrein offset parabolic antennas:
●
The antenna must be assembled and mounted professionally, following the steps described in the
enclosed instruction sheet
●
The antenna must not be modi
fi
ed (e.g. by drilling)
●
The antenna must not be damaged mechanically (e.g. deformation, deep or extensive damage,
or abrasion of the powder coating and surface coating)
●
The antenna must not be damaged due to exposure to chemicals (e.g. solvents, lacquers,
detergents or the like)
●
Only genuine Kathrein accessories may be used for the antenna
These warranty conditions are effective from the date of purchase.
Only the original sales slip is acceptable as proof of purchase for warranty claims.
Furthermore, corrosion resistance is not warranted for the consequences of force majeure, e.g. lightning strike, or if the antenna is
used in regions where frequently occurring, abrasive weather conditions may wear off the protective coating within a short period of
time (e.g. sandstorms).
936.3655/-/ZWT/0110/d - Technical data subject to change.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim • GERMANY • phone +49 8031 184-0 • Fax +49 8031 184-385
