38 / 44
Parabolic Refl ector
Installing the Parabolic Refl ector
Required Fitting Aids and Tool
●
6 fi xing screws M6 x 6 (included)
●
Allen key (5 mm AF)
Unpacking the Parabolic Refl ector
For space and shipping reasons, the parabolic refl ector is packed separately.
►
The packaging of the parabolic refl ector can be opened at the side.
►
Keep the original packaging: If it is necessary to send the unit for repair, use the original packaging to
prevent transport damage. The manufacturer accepts no liability for possible damage due to insuffi cient
packaging.
Installing the Parabolic Refl ector
Before taking the parabolic refl ector into operation, it must be mounted on the turntable.
1. Move the turntable to the raised position and stop it at approx. 30° elevation (switch off CAP converter)
2. Fasten the parabolic refl ector to the bracket using the enclosed M6 x 6 screws; tighten the screws to a torque of
5 Nm
3. Move the turntable back into parking position
