28 / 44
Incorrect wiring of the connections
Incorrect wiring of the connections can lead to malfunctions or defects in the unit.
Data loss and software damage if the CAP converter is disconnected from the mains during opera-
tion.
Always wait until the control unit is in standby mode before disconnecting it from the vehicle power supply
or mains. This ensures that any data that is new or has been changed will be saved by the control unit.
Long periods of absence or storms
In case of prolonged absence or thunderstorms, always switch off the unit (from stand-by mode) at the
mains switch.
How to use these instructions
►
Read the instructions carefully before setting up the unit.
►
Keep the instructions for future reference and pass them on to any new owner.
Updates
The information in this manual was correct at the time of going to press. However, we reserve the right to
make changes at any time without prior notice. If new software which aff ects the information in this manual
(e.g. changes to functions) is released for your CAP converter, we will, if we consider it necessary, provide a
new manual for download at
www.kathrein-ds.com
.
Repair
Make sure that repairs to the unit are only carried out by qualifi ed personnel.
►
Improper work on the unit can impair its electrical safety.
►
The manufacturer accepts no liability for accidents caused by the user opening the unit.
►
Opening the unit and attempting to repair it yourself voids all warranty claims.
Eff ects of waste heat from the unit
►
Every electronic device generates heat. The temperature rise of the unit lies within the permissible range.
Sensitive furniture surfaces and veneers may, however, discolour over time due to constant exposure to
heat.
►
The feet of the unit can cause colour changes on treated furniture surfaces. To avoid possible discoloura-
tion, place the unit on a suitable, fi rm and level surface.
