21 / 44
Removing the Turntable for Repair
If repairs to the system or individual components are necessary, contact your specialist dealer or our service centre.
Risk of injury from opening the turntable!
►
Never open the turntable.
Material damage to the unit by cutting cables!
►
Never cut the cables.
►
Disconnect the cables protruding from the turntable from the cables laid inside the vehicle at the desig-
nated cable junction. To do this, disconnect the plug of these cables.
Observe the
Safety Instructions and General Notes, p. 7.
1. Remove the parabolic refl ector
2. Move the turntable to the parking position and discon-
nect it from the power supply and the CAP converter.
3. Loosen the six M6 screws which secure the turntable
to the mounting plate.
4. Remove the turntable from the mounting plate.
5. Pull the cables out through the roof gland.
6. Use the original packaging to ship the turntable.
7. Seal the opening in the vehicle roof appropriately to
protect it against the ingress of moisture.
8. When using the HDZ 100 roof gland, close the cable
ducts that are no longer in use with the integrated
dummy plugs after removal.
What to Do in the Event of Faults
