20 / 44
Safety Instructions
Observe the
Safety Instructions and General Notes, p. 7.
Risk of material damage due to obstacles in the range of rotation or malfunction due to incorrect
setting!
►
Make sure that there are no obstacles in the range of rotation of the turntable.
►
Do not alter the settings of the LNB yourself if you are not familiar with the setting operations. Contact a
technician or try to fi nd a technically skilled person to do the settings.
Setting Operations
The following description assumes that the complete turntable has been properly assembled, installed and set up as
described in the previous sections.
The turntable is disconnected from the power supply.
1. Use a Torx screwdriver size 20 to loosen the fi xing screw of the clamp on the LNB.
2. Rotate the LNB by the desired degree.
3. Retighten the fi xing screw with a torque of 3.3 - 3.5 Nm.
4. Leave the installation location.
5. Reconnect the turntable to the power circuit.
6. The turntable is ready for use.
View after instal45°
View after installation -45°
Scale for polarisation adjustment
