LE80 Radio Receiver
Product information | en
9
TeleAlarm
User Manual
LE80_UM_EN_V1.1_2021.12
6
Open receiver
No wireless transmitter needs to be
programmed. Any transmitter within
reception range of the LE80 Radio Receiver
can activate the device.
7
Open receiver with
door number
Same functions as in mode 6, but with door
position transmission. Any transmitter
within reception range of the LE80 Radio
Receiver will activate the device, but only if
the LE80 receives a datagram (at the
exception of a dementia) which contains the
door number.
8
Unique N86
transmitter
behavior
Behavior is similar to normal mode 1, with
certain differences according to the
transmitter or call type that is activated.
Triggering an alarm on a programmed N86
transmitters will activate the Relay 1 for
max. 20 min. The 20 min. cycle can be
interrupted by the acknowledgment
function of the same N86.
The Call type "Assistance" from a
programmed transmitter in repetition mode
will produce the same effect as a programed
N86. Also in this case the 20 min. cycle can
be interrupted by the acknowledgment
function of the same transmitter.
9
Dual channel
receiver
All TeleAlarm wireless transmitters can be
programmed. Calls are indicated by Relay 1
or Relay 2, according to the slot in which the
wireless transmitter is programmed. A
battery-low signal is indicated by the red
LED.
Mode Name
Description