26 en | Operation
LE80 Radio Receiver
LE80_UM_EN_V1.1_2021.12
User Manual
TeleAlarm
When a TeleAlarm transmitter (except a N86) is activated:
–
The green LED 1 stays permanently on.
–
The LED 2 lights up red for 2 seconds.
–
Relay 1 is switched on for 2 seconds.
–
Relay 2 is switched off.
When a N86 transmitter’s red or blue button is pressed, or
when one of its inputs is activated:
–
The green LED stays permanently on.
–
The LED 2 lights up red and the Relay 1 switch on for 6
minutes or until the green button of the same N86
transmitter is pressed.
–
Relay 2 is switched off.
Battery-low indication:
–
Relay 2 switches on for 2 seconds.
–
The LED 2 blinks twice red for 2 seconds, then blinks 1
second every 10 seconds.
For all transmitters, the battery low status is triggered when
the transmitter is activated or by the battery low level status
sent with the daily message.
6.9
Dual channel receiver (mode 9)
Standby
–
The green LED 1 stays permanently on.
–
The LED 2 is off.
–
Relay 1 is switched off.
–
Relay 2 is switched off.
NOTICE!
A N86 transmitter in repeated alarm mode extends the
behavior of the LE80 Radio Receiver by approximately 26
minutes. If several N86 transmitters are programmed, each
activated transmitter stops the sequence and starts its own
sequence.