8
en | Product information
LE80 Radio Receiver
LE80_UM_EN_V1.1_2021.12
User Manual
TeleAlarm
2.4
Description of the different modes
Mode Name
Description
1
Normal (default
mode)
20 wireless transmitters can be
programmed. Calls are indicated by LED 2
and Relay 1. A battery-low signal is
indicated by LED 2 and Relay 2.
Additionally, the custom output provides
predefined voltages for four different
predefined calls.
2
LED 2 deactivated
at battery-low
indication
The same functions as in mode 1 are
available, except for the battery-low signal
which is not indicated by LED 2, but only by
Relay 2. Additionally, the custom output
provides predefined voltages for four
different predefined calls.
3
Dementia
S87L and B80A wireless transmitters are
detected. Relay 1 can be used to lock a
monitored door. Relay 2 can be used to
interrupt a monitoring device.
4
Dementia with
Accompany
This mode allows the LE80 Radio Receiver
to be connected to a wired NurseCall
system, in which the Accompany function
can be implemented. It will wait 10 seconds
after receiving a signal from a S87L
transmitter. If it detects an B80A
transmitter in this lapse of time, then no
alarm is generated. If not, then Relay 1 is
activated for 2 seconds.
5
Remote control
20 wireless transmitters can be
programmed. Per sequence, only the same
transmitter can switch on and off the Relay1.
A battery-low signal is indicated by LED 2
and Relay 2.