KATEK TeleAlarm LE80, User Manual, Page: 15 / 32

LE80 Radio Receiver Programming | en 15
TeleAlarm User Manual LE80_UM_EN_V1.1_2021.12
5 Programming
5.1 LE80 Programming method
The LE80 must be programmed in using the PR80 device
and the NurseCall Configuration Manager (NCCM) software.
The list of parameter is given in the document
"Programming Reference Manual".
The only exception is transmitters programming, which
could also be done in using the button T1 (see below).
5.2 LE80 modes
Modes 1 to 9 can be selected by the NurseCall Configuration
Manager programming tool. See detailed modes description
in
Chapter 2.4.
5.2.1 Reduced radio range
The LE80 can be set to a reduced radio range for all modes,
using a parameter which could be programmed. In this
Mode Description
1 Normal mode (default mode)
2 LED 2 deactivated at battery-low
indication
3 Dementia
4 Dementia with Accompany
5 Remote control
6 Open receiver
7 Open receiver with door number
8 Unique N86 behavior
9 Dual channel receiver
NOTICE!
Factory setting is mode 8