LE80 Radio Receiver
Programming | en
17
TeleAlarm
User Manual
LE80_UM_EN_V1.1_2021.12
To start programming
–
Press button T1 for min. 1 second and max. 3 seconds.
Device behavior
–
LED 1 stays permanently green.
–
LED 2 blinks red slowly for maximum 30 seconds.
Within these 30 seconds, activate the transmitter that you
want to match, the following behavior should be observed:
–
LED 1 and LED 2 blink alternating green-red for 6
seconds.
This indication confirms that the transmitter is now
programmed.
–
If the transmitter is already programmed, then LED 2
blinks fast red for 6 seconds after activating the
transmitter.
–
If 20 transmitters are already programmed, then LED 2
blinks fast red for 10 seconds directly after activating
the button T1 between 1 and 3 seconds.
You can repeat the sequence with another transmitter.
5.5
Manual deleting a transmitter
To start deleting:
–
Press button T1 for min. 5 seconds and max. 10 seconds.
NOTICE!
All programmed transmitters will be deleted only when
changing mode 1, 2, 5, 8 and 9 to mode 3, 4, 6 or 7,
NOTICE!
Per sequence only one transmitter can be deleted.