LE80 Radio Receiver
Installation | en
11
TeleAlarm
User Manual
LE80_UM_EN_V1.1_2021.12
3
Installation
3.1
Unpacking
The LE80 Radio Receiver is carefully packed for
transportation. The components contained in the box are
protected, but should be handled with care. Store the
packaging material for further use (storage or transport).
Check that the LE80 Radio Receiver have not been damaged
during transportation. In case of defective equipment, do not
try to install the LE80 Radio Receiver.
Contact immediately your local representative.
3.2
Wall installation
You can fasten the LE80 Radio Receiver on a smooth wall
surface using two screws. Installation cables should be
placed inside the cable channels on the bottom of the LE80
Radio Receiver.
A mounting plate for easy mounting preparation as well as
to give a certain mobility to the LE80 can be used. The
mounting plate works as a bracket. To fix the LE80 it must be
attached to the wall bracket and then pull it down slightly. To
remove the LE80 from the bracket the underside is raised
slightly away from the mounting plate and then pushed up
slightly. The mounting plate is only attainable in a set of 10.
Figure 3.1
Dimensions of the backside of the LE80 Radio Receiver
53.8
80
13.1
Ø7.5
3.7
16
27
6.6