Katadyn Spectra Watermakers Catalina 340R, Installation And Operating Manual

Page: 27 / 73

27
Customer - Sourced Tank Full Switch
Installing an optional tank full float switch at the top or the side of your water
tank allows the watermaker to fill your ship
’ s water tank then automatically
stop running. The user can then fresh water flush the system by hitting ’ Stop ’
and then ’ FWF ’ on the Remote Controller.
Your watermaker does not come with the top - mounted Tank Full Switch
(EL - SWT - LV). However, this part can easily be sourced from your local
dealer or Full Service Provider if you wish for your system to
automatically stop once your freshwater tank is full.
If you do not install the Tank Full switch in your tank, you MUST
MANUALLY STOP the system when your freshwater tank has been filled. The system will not
stop automatically.
Note: The float may need to be flipped 180 degrees to work properly. Many floats can be
easily flipped by removing the clip opposite the wire.
Optional Tank Switch - Cont.
Drill and Tap
Drill and tap a 1/8” NPT port into the top of the fresh water tank if using a top - mounted float
switch or into the side of the tank if using a side - mounted float switch. A top - mounted float
can be installed on a tank access cover, or directly into the water tank. If installing on an
access cover, be sure to leave a service loop on the float switch wiring to allow removal of the
tank access cover.