Note 1: The dedicated shoes must not be used on any other surface than on the C2 Core
platform for any other purpose.
Note 2: It is expected that due to the friction force, walking and running may cause scratches on the
platform surface. It will not influence the normal operation and performance of the device.
Note 3: Before entering the platform，please start SteamVR and select the mode in KAT Gateway.
Entering the Platform
Wake Up the Device Everytime
- Wake up the device everytime before
getting on if it entered sleepmode (No
movement for more than 30 min, lights off).
- Click the main button and shake the shoes
to wake up.
- Check the connection status on Gateway.
Preparation for Getting On
- Hang the controllers on the knob.
- Ensure the anti-slip protection lock is enabled and
the base surface is clean.
- Tear open all the Harness straps.
- Equip kneepads and step onto the middle of the
platform.
- If you have long hair, please tie them up.
Extend and tighten the Waist Harness
- Adjust the waist harness vertically near the thinnest part of your waist.
- Begin with the left inner belt, extend strongly and stick the Velcro, making the belts closely fit
your waist. Repeat for other 3 belts (Sequence as shown) to tighten the harness until it feels in
synergy with your body.
- Check the Velcro alignment. Fasten the buckle and adjust the belt length if needed.
19
Summary of Contents for KAT Walk Coord 2 Core
Page 28: ...www kat vr com...
