KAT VR KAT Walk Coord 2 Core, Owner'S Manual

Page: 5 / 28

WARNING
To avoid injury or damage to the product, read and follow all the assembly and operation
instructions before using KAT Walk Coord 2 Core.

This device is intended for use by healthy people aged 14 to 60, who are between 1.55m/
5'1" and 2m/6'7" of height (recommended 1.60m/ 5'3" to 1.95m/6'5”) and weight below
130kg (286 lbs.). Do not use the KAT Walk Coord 2 Core if you do not meet the age, height,
or weight requirements, or if your physical condition does not allow for moderate to
intense physical activity. If you are uncertain of your health condition, please consult your
doctor prior to using this devise. Use of the device for more than 1 hour without a break is
not recommended.

The device has been designed specifically for personal VR entertainment . Use for any other
purpose, including but not limited to medical rehabilitation is strictly prohibited.

It is strictly forbidden to insert fingers, hands or any body part into any moving part(s) and
openings.

Please use the device according to the corresponding instructions or under the guidance of
a professional to avoid injures

Pregnant women or those with epilepsy, cardiopulmonary diseases,eye diseases,mental
illness, anemia, people undergoing postoperative recovery and people with any physical or
limb diseases, especially lower limb diseases are strictly prohibited from using this device

WARNING - This product is not intended for children under the age of 14. The product
SHOULD NOT be stored in a room that children under the age of 14 or pets may access
without supervision. Any spectators should keep a distance of at least 3 feet or 1 meter
while the product is in operation.

It is the owner's responsibility to follow installation and safety instructions. Failure to
follow instructions may result in product instability and/or risk serious bodily injury or
death to users, bystanders, children, or pets.

Always check the device before use to confirm that it is in a normal state without cracks,
scratches, bumps, bends, oddly moving parts or other signs of wear and tear.Check all
connections and moving parts to ensure that the nuts, bolts, and other joint structures are
tightly fastened.

The product base is slippery. When stepping on and off, make sure the anti-slip lock on the
3