29 / 123
Landing gear view
Optionally, an aluminum landing gear
can be supplied.
Before you start to drive ope-
rations, make sure that the
landing gear is turned off (hig-
hest position).
3.6. Side Protection Equipment
(Underrun Protection)
The side protection equipment must be
in the off position while driving. Some
side
protection
equipment
can
be
opened upwards to facilitate service op-
erations such as accessing the spare
tire.
Underrun protection
Travelling with the opened un-
derrun protection is dange-
rous and illegal. In this case,
there may be serious injuries,
including death, in road acci-
dents that may occur. Before
travel, make sure the under-
run protection is lowered and
properly secured.
Pin
Removing Underrun Protection:
After
opening the protection release pins (2)
on both sides, the underrun protection is
removed and taken out.
If the underrun protection is
not fixed properly, it may fall
and cause injury.
Installing Underrun Protection:
Insert
the protection into its slot from both sides
and insert the pins.
3.7. Semi-Trailer Axle System
Axle with disc or drum type brake mech-
anism are used in your vehicles.
Semi-trailer axles may only be loaded
with the maximum legally permissible
axle load indicated on the vehicle identi-
fication plate. The user is responsible for
use of the trailer in accordance with its
purpose
and
capacity
and
for
its
maintenance.
The healthy operation of the brake sys-
tem of the semi-trailer depends on the
usage of the semi-trailer with the same
system and/or compatible tractor. For
