Hose holder
Do not forget to close the co-
vers of the hose carriers befo-
re driving. Hoses can fall,
causing
injuries
and
accidents.
Prevent the product remaining
in the discharge hoses from
dripping onto the ground. In
case
of
dripping
into
the
chamber, valve can be used to
drain the liquid.
3.12.11. Working Lamp
It is located at the rear of the vehicle,
mounted on the top of the bumper or on
the chassis profile (1). Its location may
vary depending on the construction of
the vehicle and the customer's request.
It is located at the rear of the vehicle for
use in work after dark. The lamp can be
rotated up-down and left-right so that the
lamp can be used more comfortably and
in a wider area. The lamp can be turned
on and off with the switch (2) on the
back.
Working lamp
Working lamp switch
Putting the lamp into use:
Remove the upper arm of the lamp from
the lock-latch mechanism by pulling the
lamp, then use it by pulling it to the de-
sired area.
Fixing the lamp in place:
After use, push the lamp into place by
folding the foldable arms. Fix the lamp
you have pushed into place by locking
the lock-latch mechanism.
If equipped, be sure to fold up
(close) the parking sign at
night before putting the lamp
into use.
Do not start driving without
fully
securing
the
working
lamp with the lock-latch mec-
hanism. Otherwise, the lamp
may be thrown while driving
and cause injury.
Optionally, the working lamp switch can
also be supplied behind the working
lamp.
