57 / 123
4.1.16. Manometer
One thermometer (1) is located on the
rear part of the tank, upper part of hand-
wheel bottom valve control, in order to
measure the temperature of the material
inside the tank.
Manometer
Depending on the customer's request,
another manometer (2) can be placed
right after the pressure safety valve. The
locations of the manometers vary ac-
cording to the construction of the vehicle.
When there is pressurized air in the sys-
tem, it is important to monitor the pres-
sure. Necessary measures should be
taken immediately in case of pressure
rise and fall.
Manometer
4.1.16.1. Drain Valves
Two discharge valves are located on spill
box (1) around manhole cover and one
on hose carrier (2). They are used for
discharge of rain water, cleaning water
or any remaining material. Hose carrier
discharge valve is located on back of the
carrier, with opening of this valve col-
lected
water
discharges
directly
to
ground. Discharge openings on spill box
are located just on the backside of venti-
lation valves, right and left hand sides;
discharged water from there drains di-
rectly to ground from valves under the
tank (3).
Drain hole
Drain valve
Bottom drain valve
