Karmann Ontario 580, Instruction Manual

Page: 52 / 78

ELECTRICAL EQUIPMENT
7-8
Installed halogen spotlights in the bathroom
The halogen spots are fitted with halogen bulbs
of different power ratings.
• To change the bulb, first switch the power
supply off.
• The lamp glass is held by a clamping ring.
With a small screwdriver, press this ring
together until it can be levered over the
retaining lug.
• Pull the halogen bulb out of its holder.
• When installing proceed in the reverse order.
Halogen lamps
• To change the bulb, switch off the power
supply.
• Pull the halogen bulb out of its holder.
• When installing proceed in the reverse order.
Note
Do not touch the glass body of the new bulb
with unprotected fingers because any finger-
prints left on it can considerably shorten its
service life.
Changing bulbs
Insert a flathead screwdriver in the side slot
of the lamp and push the element towards
the front.
Halogen lamps
Achtung
Do not turn the coachbuilt lamp towards
the ceiling. Maintain clearance of 10 cm
between the lamps and all materials
such as bed covers for example.
Avoid build-up of heat caused by opened
top cabinet doors near the halogen
spotlights. Exposure to heat for too long
can discolour the door surface.
Caution