Karmann Ontario 580, Instruction Manual

Page: 45 / 78

Connecting the mains input
You need a three-pole CEE connection cable
and, in some cases, an extension cord. Prior
to travelling (even to other countries within
Europe), inform yourself of the standard plugs
and connection systems. The cable has to be
a flexible rubber hose cable that is permissible
for outdoor use and which has a cross-section
of at least 3 x 2.5 mm
2 and a length not
exceeding 25 m.
1. Open the connection outlet on the vehicle
and flip the protective cover of the connection
plug up.
2. Place the connection cable outlet on the
outer plug. Subsequently connect the plug
of the connection cable with the 230 V
supply.
3. Disconnect the mains input in reverse
order.
ELECTRICAL EQUIPMENT
7-1
Electrical current!
Touching voltage-conducting parts can
result in death. If the electrical system is
defective, parts could become voltage-
conducting and fire could result.
Please adhere to the operating instructions
for the control panel and the distribution
module as well as the following notes:
• Make sure the connected current
matches the electrical system's technical
data.
• Only use intact connection cables with
a maximum length of 25 m to connect
the electrical system to the mains input.
Always uncoil cable reels entirely
because they can otherwise overheat.
• Make sure that it is not possible to trip
over the connection cable.
• Only have work done to the electrical
system by an authorized specialist
repair shop.
• Have the electrical system inspected
by an authorized specialist repair shop
on a regular basis.
• Prior to any work on the electrical system,
switch off all devices and lamps,
disconnect the external 230 V mains
input and disconnect the body batteries.
• Only operate intact electrical devices
using the electrical system and do not
exceed the electrical system's maximum
permissible output.
Caution
Cable reels should be uncoiled entirely
to prevent overheating.
Caution
Your motorhome has a combined 230 V/ 12 V
system. This electrical system includes the
connection plug (230 V), the two-pole automatic
circuit breaker with earth leakage protection,
the charging device, the distribution module
with 12 V use box, the body battery and the
control panel.