manualshive.com logo in svg

Karl Storz AIDA WD 300, System Description

Share
Download
Karl Storz AIDA WD 300 System Description Download Page 206

Appendix 

7-8

 

96296081

EN / 

BA

7. 2  Regulatory Statements Radio Equipment

7. 2. 1  USA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi

-

tions: 

a. This device may not cause harmful interference, and 
b. This device must accept any interference received, including interference that may cause undesi-

red operation.

Contains FCC ID: PD98265NG

7. 2. 2  Canada

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the follo

-

wing two conditions:

a. 

This device may not cause interference; and 

b. This device must accept any interference, including interference that may cause undesired opera-

tion of the device.

Contains IC: 1000M-8265NG

7. 2. 3  European Union

For indoor use only

Radio Equipment Directive (RED) 2014/53/EU

Summary of Contents for AIDA WD 300



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands