Karl Storz AIDA WD 300, System Description

Page: 104 / 210

2-12
96296082EN / BA
Description of the program functions
Setting up the interface to the DICOM Worklist provider or MPPS
1. If you want to allow access to a DICOM Worklist or MPPS, place a check mark next to Enable
Worklist
or
Enable MPPS
.
1
NOTE: If you remove the check mark, the Import DICOM Worklist or MPPS button will no longer be
displayed on the user interface.
1
NOTE: Do not make the settings described below when you have removed the check mark.
1
NOTE: The fields Server AET, Server IP and Port are outlined in yellow until an entry has been
made.
2. Under
Server AET
, enter the AE title of the DICOM Worklist server.
3. Under
Server IP
, enter the IP address of the DICOM Worklist server.
4. Under
Port
, enter the port for the DICOM Worklist server.
1
NOTE: With MPPS, the option to select different date display options is not available.
5. Under Date filter , limit the date range which is to be displayed when searching for patient data in
the DICOM Worklist.
Today: Only display the patients on the Worklist for the current day.
One Day: plus/minus 1 day
Two Days: plus/minus 2 days
Three Days: plus/minus 3 days
Select None if you do not wish to limit the date range.
6. Set the Timeout .
Timeout: 30 seconds
1
NOTE:
The Timeout can be changed if necessary, but should otherwise remain in factory settings.
7. Tap on
Echo
to test the connection to the DICOM server or MPPS.
1
NOTE: If the connection test fails, there is probably an error in the network connection or in the
entered server access data.
1
NOTE:
Consult with your facility’s IT department as regards connection problems.