Karl Storz AIDA WD 300, System Description

Page: 176 / 210

Important information for safe use
1-2
96296081 EN / BA
1. 4 Notes for operators
• This device is produced in accordance with state-of-the-art technology and is safe to
operate. Nonetheless, the device may still be a source of risk, especially if it is operated by
personnel who are not adequately trained or if it is used incorrectly and for a purpose other
than its intended use.
• The device must be operated, cleaned, and disinfected by specialist personnel only.
3
Warning:
All of the assembly work, disassembly work and setting adjustments described in
this instruction manual must only be carried out by trained specialist personnel who have been
delegated to do so by the operator.
• For safety reasons, actions or interventions which extend beyond those described in
this manual must only be carried out by KARL STORZ or a company authorized by
KARL STORZ. Before a company can receive this authorization, the service personnel of the
company in question must successfully participate in a technical training course conducted
by KARL STORZ. Authorization is then granted for a fixed period of time.
1. 4. 1 Initial commissioning
• This instruction manual is valid following an initial commissioning procedure which has been
properly carried out.
• The device must be thoroughly cleaned and disinfected before initial use.
1. 4. 2 Availability of the instruction manual
• The instruction manual is a component of the device and must therefore be kept at a location
in the immediate vicinity of the device to enable reference to safety instructions and important
information regarding its use at any time.
• Do not pass the device on to a third party without a valid instruction manual. With the aid of
the identity number and version number, ensure that an up-to-date, valid instruction manual is
passed on with the device.
1. 4. 3 Warranty
KARL STORZ guarantees the safe and proper functioning of the device only subject to the
following conditions:
• The device is used only as designated and operated in accordance with the information
provided in this manual.
• Only original replacement parts or accessories which are defined and approved by
KARL STORZ SE & Co. KG are used. The use of other parts poses unknown risks and must
be avoided at all times.
• No structural modifications are made to the device. Unauthorized modifications or alterations
to the device or the software are not permitted for safety reasons and void the guarantee.
• Inspection and maintenance work is carried out in accordance with the prescribed time intervals.
• Initial commissioning has been performed.