manualshive.com logo in svg

Karl Storz AIDA WD 300, System Description

Share
Download
Karl Storz AIDA WD 300 System Description Download Page 192

Installation

4-2

 

96296081

EN / 

BA

4. 3  Installation and Comissioning

The device can be operated free-standing, in a rack or as a wall-mounted solution in eit-

her a vertical or horizontal position. 

4.3.1  Minimum requirements

•  Ambient conditions for operation as described in section 1.7.
•  Consideration of the technical data as described in section 3.3.
•  Consideration of the free area dimensions based on the graphic below to guarantee 

that the device is properly ventilated.

 

1

note: nothing

 

may be mounted to the left and right of the device in the defined free 

areas.

85,9

310

85,9

20

375

20

Device Enclosure

Device front panel

Defined open area

Max. temperatur 35° C

Air 

inlet

Air 

outlet

Summary of Contents for AIDA WD 300



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands