EVM Modules of the MS Series Technical Introduction and User’s Guide
67
Notes:
1.
While you are listening to the messages:
-
If you dial
0,
then
you return to the beginning of the message you are
currently listening to.
-
If you dial
1,
then
you proceed to the next message.
-
If you dial
2,
then you return to the point that is about 3-3,5 sec
earlier and you go on listening to the same message.
-
If you dial
3,
then, starting from the moment you are in, the voice
level of the message is increased by one unit and you go on listening
to the message.
-
If you dial
4,
then
you go to the point that is about 3-3,5 sec later and
you go on listening to the same message.
-
If you dial
6,
then
starting from the moment you are in, the voice
level of the message is decreased by one unit and you go on
listening to the message.
-
If you dial
8,
then you lock the message you are listening to at that
moment (if you have the required authorization) so that it is not
erased until you listen to it again, and then you proceed to the next
message.
-
If you dial
9,
then you erase the current message and proceed to the
next one.
2.
When the messages are remotely listened to like that, the 15-minute
erasure time-out period does not apply for them.
PDF created with pdfFactory Pro trial version
