EVM Modules of the MS Series Technical Introduction and User’s Guide
35
THE SYSTEM MESSAGE FEATURES
The system message features are the ones that are present only in EVM128S
and EVM224S modules.
Thanks to the system messages, extensions are informed about the changes
which occur in the statuses of their phones due to features they make use of
or activate.
There are 64 message boxes on the module for that purpose. The first 26 of
them are the ones that can be changed through programming and they are
directly used to inform the extensions. Concerning the other 38 messages,
they are the date and time messages and they are employed for informing an
extension about the time and the date of a message left for her/him, upon
the playback of the message.
Explanations of programs, which can be used in relation with the System
Messages are located below:
Erasing The Entire System Messages:
This program allows the entire messages in the system messages flash
memory module to be erased.
86443
Notes:
1.
The first 26 (00-25) messages can be erased by this feature. The
message boxes number 26-63 cannot be erased because they contain
the date and time messages.
2.
Silence is received from the handset throughout the erasing operation.
Upon completion of the operation, the internal dial tone is heard again.
3.
The operator must take the ACD service off line before entering that
program.
PDF created with pdfFactory Pro trial version
