EVM Modules of the MS Series Technical Introduction and User’s Guide
41
Notes:
1.
Only the first 26 messages can be played back through this feature.
2.
This program can be entered only through the operator phone while the
system is in programming mode.
3.
A dual-frequency tone is received during the erasing operation and when
the operation is over, the internal dial tone is received.
4.
The operator must take the ACD service off line before entering that
program.
The System Message Gain:
Voice levels of the system messages recorded into the EVM Module can be
adjusted by this program.
86448P
Parameters:
P
: 1,2…..8
Voice level, which is 1 at minimum and 8 at maximum
Default value:
P=4
Notes:
1.
This program can be entered only through the operator phone while the
system is in programming mode.
2.
The voice level value entered here is not valid for the messages
recorded into the DRAM memory.
3.
The operator must take the ACD service off line before entering that
program.
PDF created with pdfFactory Pro trial version
