Kärcher SC 5 EasyFix Premium, Manual

Page: 13 / 202

English 13
Device description
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, refer to the graphics page.
Illustration A
1
Device socket with cover
2
Water reservoir
3
Carrying handle for the water reservoir
4
Selector switch
5
Control panel
6
Display - OFF position
7
Display - water shortage (red)
8
Display - heating (green)
9
Steam stage 1
10
Steam stage 2
11
Steam stage 3
12
Steam stage 4
13
VapoHydro function steam stage
14
Display - iron detection
15
Display - steam gun detection
16
Cap for accessory compartment
17
Maintenance lock
18
Carrying handle
19
Holder for accessories
20
Accessory storage compartment
21
Mains connection cable storage compartment
22
Park bracket for floor nozzle
23
Mains connection cable with mains plug
24
Non-driven wheels (2 x)
25
Steering roller
26
Steam gun
27
Steam lever
28
Unlocking button
29
Child lock
30
Steam hose
31
Steam connector
32
Spotlight nozzle
33
Round brush (small, black)
34
** Round brush (small, yellow)
35
Power nozzle
36
Round brush (large)
37
Manual nozzle
38
Microfibre cover for manual nozzle
39
** Microfibre abrasive cloth for manual nozzle
40
Extension tubes (2 x)
41
Unlocking button
42
Floor nozzle
43
Hook and loop fastener
44
Microfibre floor cloth (2 x)
45
Carpet glider
46
Descaler
47
** Steam pressure iron
48
Steam switch (bottom)
49
Indicator light (orange) - heating
50
Steam switch (top)
51
Lock for steam switch
52
Temperature controller
53
Steam connector
** optional
Installation
Installing accessories
1. Open the cover on the device socket.
Illustration B
2. Connect the steam connector to the device socket
so that the steam connector audibly engages.
Illustration B
3. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration H
4. Push the open end of the accessory onto the spot-
light nozzle.
Illustration I
5. Connect the extension tubes with the steam gun.
a Push the first extension tube onto the steam gun
so that the unlocking button on the steam gun en-
gages.
The connection pipe is connected.
b Push the second extension tube onto the
first extension tube.
The connection pipes are connected.
Illustration J
6. Push the accessory and / or the floor nozzle onto the
free end of the extension tube.
Illustration K
The accessory is connected.
Disconnecting accessories
1. Set the child lock to the rear.
The steam lever is locked.
2. Push the cover on the device socket down and dis-
connect the steam connector from the device sock-
et.
3. Push the unlocking button and pull the parts apart.
Illustration P