Kärcher KMR - TRAC, User Instructions

Page: 38 / 228

36
English
User Instructions
KMR – TRAC
Checking the engine oil level
Changing the engine oil
!
Caution
Environmental hazard caused by engine oil
The waste oil that results from an oil change should be
handed in at an appropriate collection point or properly
equipped disposal unit.
„
Park unit on a level surface, and switch OFF.
„
Clean area surrounding dipstick.
„
Pull out dipstick.
„
Use suction pump (Order no. 6.491-538) to draw off
oil. Push suction tube as far as possible into filler
hole.
„
Pour oil into filler hole
„
Re-insert dipstick.
1.039-104 Stratton
Engine oil (> 4°C) SAE 30
Engine oil (< 4°C) SAE10W30
Capacity 1,0 l
1.039-144 Honda
Engine oil (> 4°C) SAE10W30
Engine oil (< 4°C) SAE10W30
Capacity 0,65 l
„
Park sweeper on a level surface, and switch OFF.
„
Clean area surrounding dipstick.
„
Pull out dipstick.
„
Wipe dipstick clean, and re-insert.
„
Pull out dipstick again and check oil level.
Oil level must be between marks on dipstick.
If oil level is below bottom mark – top up with oil.
If oil level is above top mark – drain off excess oil.
„
Re-insert dipstick.
Filling up with engine oil
„
Pull out dipstick.
„
Pour oil into filler hole - see Changing the engine oil
„
Re-insert dipstick.
Checking the battery acid level For acid-filled batteries, check the condition of the
battery acid at regular intervals. The battery should
always be fully charged before the battery acid is tested.
„
Fill up to mark with distilled water.