Kärcher KMR - TRAC, User Instructions

Page: 42 / 228

40
English
User Instructions
KMR – TRAC
Troubleshooting
Fault
Possible cause Remedy
Sweeper does not start up No weight on driver seat
(Contacts on seat switch) Sit on driver seat
Clutch/brake pedal not
depressed Press down on clutch/brake
pedal, and hold in position
Defective safety switch Replace seat switch or clutch
pedal switch (Customer Service)
Tap in fuel line closed Open fuel tap
Fuel tank empty Fill up with petrol
Flat battery Recharge battery
Worn out or defective spark plug Replace spark plug
(Customer Service)
Blown fuse Replace fuse
Engine is running, but sweeper
does not move Loose or torn belt Re-tension or replace belt
(Customer Service)
Unit does not sweep properly Worn out or damaged brush
roller Replace brush roller if worn out,
damaged or when bristles are
down to 50 mm in length
Loose belt Re-tension belt
(Customer Service)
Coarse-dirt flap sticking Ensure coarse-dirt flap can move
freely
Unit blows out dust Blocked or defective plate filter Clean off or replace filter
Worn out or damaged sealing
skirts Replace sealing skirts
Blocked suction hoses Clean out suction hoses
Coarse-dirt flap sticking Ensure coarse-dirt flap can move
freely