Operating Instructions
KMR 1700 D
English
44
!
Replace the gasket ring
Replace the pre-filter
!
Push-back the clamps
!
Pull-off the hoses
!
Replace the pre-filter (observe
correct flow direction!)
General check
!
Check the fuel hoses and clamps
for leaks and damage
!
Open the fuel tap
!
Vent the fuel system
Vent the fuel system
!
Loosen vent screw 1
approx. 2 turns
!
Loosen vent screw 2
approx. 2 turns
!
Have an appropriate catch pan
ready for fuel
!
Start the engine until fuel without
air bubbles comes out
!
Tighten the venting screws
Replace the sealing stripsln
!
Unscrew the fixing screw of the
side shroudings
!
Take-off the side shrouding
Side sealing strips
!
Unscrew the mountings of the
sealing strips
!
Screw-on the sealing strips but
do not yet tighten them
!
Slide 5 mm thick rest under
sweeper to set ground clearance
!
Align the sealing strips
!
Tighten the fixings of the sealing
strips
Rear sealing strips
!
Take-off the folding splint
!
Take-off the shrouding
!
Unscrew the mountings of the
sealing strips
!
Screw-on the sealing strips but
do not yet tighten them
!
Slide 5 mm thick rest under
sweeper to set ground clearance
!
Align front sealing strip