![background image](http://html1.mh-extra.com/html/karcher/kmr-1700-d/kmr-1700-d_operating-instructions-manual_3635899022.webp)
Operating Instructions
KMR 1700 D
English
45
!
The rear seal should overlap the
front seal by 2 cm
!
Tighten the fixings of the sealing
strips
Front sealing strips
!
Start engine
!
Raise the swept material
container to the end position
!
Shut-off the engine
!
Lock the hand brake
!
Pull out pin of locking rod
!
Remove locking rod
!
Insert locking rod
!
Unscrewing the sealing strips
!
Fold the new sealing strips and
screw-on again with the mounting
rail
Sealing strips of swept material
container
!
Replacing the sealing strips
!
Remove locking rod
!
Insert locking rod
!
Insert pin of locking rod
!
Start engine
!
Run-in the swept material
container to the end position
!
Shut-off the engine
!
Lock the hand brake
Changing bulbs
!
Unscrew the hexagonal head
screws of the headlight holder
!
Take-out the headlight and
disconnect the cable plug
Note:
Note the position of the plug
!
Unscrew the headlight casing to
take it apart
!
Pull the headlight casing apart
!
Hold the headlight casing
horizontally; the headlight is not
attached