background image

English

HDS 798 C

6

IMPORTANT SAFETY

INSTRUCTIONS

WARNING

WHEN USING THIS PRODUCT
BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:

*

  DO NOT USE WITH FLAMMABLE

LIQUIDS AND TOXIC
CHEMICALS.

*

  INJECATION HAZARD:

EQUIPMENT CAN CAUSE
SERIOUSE INJURY IF THE
SPRAY PENETRATES THE
SKIN. DO NOT POINT THE GUN
AT ANYONE OR ANY PART OF
THE BODY. IN CASE OF
PENETRATION SEEK MEDICAL
AID IMMIDIATELY.

*

  THIS SYSTEM IS CAPABLE OF

PRODUCING 12000KPA.TO
AVOID RUPTURE AND INJURY,
DO NOT OPERATE THIS PUMP
WITH COMPONENTS RATED
LESS THAN 12000KPA
WORKING PRESSURE
(INCLUDING BUT NOT LIMITED
TO SPRAY GUNS, HOSE AND
HOSE CONNECTIONS).

*

 BEFORE SERVICING,

CLEANING OR REMOVAL ANY
PARTS, SHUT OFF POWER AND
RELIEVE PRESSURE.

*

  DO NOT USE GASOLINE,

CRANCASE DRAININGS, OR OIL
CONTAINING GASOLINE OR
SOLVENTS.

*

  WARNING: RISK OF INJECTION

OR SEVERE INJURY. KEEP
CLEAR OF NOZZLE. DO NOT
DIRECT DIRECT DISCHARGE
STREAM AT PERSONS. THIS
EQUIPMENT IS TO BE USED
ONLY BY TRAINED
OPERATORS.

*

  Read all the instructions before

using the product.

*

  To reduce the risk of injury, close

supervision is necessary when a
product is used near children.

*

  Know how to stop the product and

bleed pressure quickly. Be
thoroghly familiar with the controls.

*

 Stay alert watch what you are

doing.

*

  Do not operate the product when

fatigued or under the influence of
alcohol or drugs.

*

  Keep operating area clear of all

persons.

*

  Do not overreach or stand on

unstable support. Keep good
footing and balance all times.

*

  Follow te maintenance instructions

specified in the manual.

*

  This product must connected to a

power supply receptacle protected
by a GFCI (ground fault circuit
interrupter). „If Replacement Of
The Plug Or Cord Is Needed, Use

Only Identical Replacement
Parts.“

*

  WARNING Risk of injection or

injury-Do Not Direct Discharge
Stream At Persons.

Grounding Instructions

*

  This Product must be grounded. If

it should malfunction or
breakdown, grounding provides at
a path of least resistance for
electric current to reduce the risk
of electric shock. This product is
equipped with a cord having an
equipment-grounding conductor
and a rounding plug. The plug
must be plugged into an
appropriate outlet that is properly
installed and grounded in
accordance with all local codes
and ordinances.

*

  DANGER - Improper connection of

the equipment grounding
conductor can result in a risk of
electrocution. Check with a
qualified electrician or service
personel if you are in doubt as to
wether the outlet is properly
grounded. Do not modify the plug
provided with the product - if it will
not fit the outlet, have a proper
outlet installed by a qualified
electrician. Do not use any type of
adaptor with te product.

SAVE THESE INSTRUCTIONS

Prior to initial startup, operating
manual and safety instructions
no.. 5.951949 must be consulted!

Inform retailer immediately of any
transportation damage.

ENVIRONMENTAL PROTECTION

Items used when working, such as
fuel, oil, cleaning agent and
contaminated maintenance
materials, are to be deposited at a
special collection point.

Packaging materials, metal and
plastic containers are to be set aside
for recycling as appropriate.

Summary of Contents for HDS 798 C















Reviews: