Kärcher HD 10/15 F, Manual

Page: 5 / 12

English
5
Please read these operating
instructions carefully before
working on your appliance. Retain the in-
structions for use for future reference or for
subsequent possessors.
The upgrade kit includes a hose drum for
the high pressure hose and the necessary
installation materials. – Assembly must be carried out by a qual-
ified specialist.
– There are sharp edges in the appliance!
Wear gloves during the installation.
Note
The high pressure hose included with the
appliance can no longer be used with the
hose drum and must be replaced with a
new one. Order number: 6.391-885.0
(10m), 6.391-886.0 (20m)
Top screws
Rear screws
Î Remove the 4 fastening screws of the
covering plate.
Î Tilt the cover plate rearward.
Î Remove stopper
Î Insert grommets
Î Guide the connecting hose through and
slide it down.
Î
Close the cover plate, pull the detergent
hoses out to stretch them.
Î Reinsert the rear screws
Î Fasten the slide bars as shown
Î Tilt the appliance rearward.
Note
If you lay the container down, the remaining
water will leak from the swimmer container.
Î Open both latches on the front machine
cover.
Î Remove cover.
1 High pressure connection
2 Fastener
3 Stopper
1 Union joint
2 Stopper
3 O ring
Î Grease the O-ring, place on top of the
stopper
Î Install the stopper and tightly attach the
covering nut
Î Pull the fastener out of the high pres-
sure outlet.
Î
Remove the stopper, grease the seal
ring and slide the connecting hose in
Description Safety instructions
Assembly