English
Operating Instructions BR/BD 530/530 XL
21
Cleaning
n
Swivel up the running gear and lock.
n
Clean the unit.
Adjust the propulsion speed
(only BD 530 or BD 530 XL)
n
Throttle speed:
rotate knob towards –.
n
Increase speed:
rotate knob t.
Caution!
Before removing the brush, reduce
the speed.
Setting the water flow rate
n
Set the water flow rate with the control
knob according to the dirt on the floor
covering.
Information:
Start cleaning on a low water flow
rate. Gradually increase the water flow rate
until the desired cleaning result is obtained.
Lowering the suction bar
n
Press down the lever; the suction bar is
lowered.
n
Switch on the suction motor with the
switch.
Information:
The suction bar automatically adapts
itself to the floor conditions and does not
require any special adjustment.
To improve the vacuuming result, the
suction bar can be rotated or tilted.
Caution!
To prevent damage to the floor, do
not operate the unit on the spot.
n
Actuate the trigger lever, the brush
motor starts.
i
i
