Operating Instructions BR/BD 530/530 XL
English
20
Attaching the brushes
BD 530 or BD 530 XL
Before switching on the unit, the disc
brushes must be attached (see
“Maintenance procedures”).
Operation
Caution!
Before reversing, raise the suction
bar.
Information:
The unit is designed with the brush
head projecting from the right side,
enabling the operator to clean up to
the very edge.
Adding detergent
Caution!
Use the recommended detergents
only. If other detergents are used, the
operator increases the risk of malfunctions
and accidents.
Detergents must not contain solvents,
hydrochloric acid or hydrofluoric acid.
Information:
Do not use detergents which foam
vigorously.
n
Open the cover.
n
Fill with fresh water (maximum 60 °C).
n
Add detergent.
Comply with the metering information.
Recommended detergents
Detergents are available from specialist
outlets.
Driving
n
Close the cover.
n
Insert the mains plug into the socket.
n
Set master switch to “I”.
Information:
If the brush motor does not start when
switched on, unload the brush motor by
pulling back the unit.
Running gear
Down: Transportation
Up: Cleaning
n
Raise the unit slightly with the handle.
n
Pull out the locking device.
n
Swivel the running gear into the desired
position.
n
Engage the locking device.
Driving to the place of work
n
Swivel down the running gear and lock.
n
Push the unit to the place of work.
i
i
Application:
Detergents
Maintenance cleaning
(also for alkaline-sensitive
floors)
RM 745
RM 746
Cleaning greasy dirt
deposits
RM 69 ES ASF
RM 69 ASF
Basic cleaning (stripping)
alkaline-resistant hard floor
coverings
RM 752
Basic cleaning (stripping)
linoleum
RM 754
Sanitary cleaner
RM 25 ASF
Disinfectant cleaner
RM 732
i
