Kärcher BD 530 XL BAT, User Manual

Page: 28 / 384

– 10

Danger
Risk of injury. Before carrying out any tasks
on the device, switch off the button for
brush operations and suction turbine and
pull out the charger plug.
Caution
Risk of damage to the appliance on ac-
count of water leakage. Empty the waste
water reservoir and the fresh water reser-
voir prior to performing maintenance on the
appliance.
 Park the machine on an even surface.
Caution
Risk of damage. Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.

Drain off dirt water.

Rinse the dirt water reservoir with clear
water.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Check the fluff filter, clean if required.
 Clean the vacuum lips and the wiping
lips, check for wear and replace if re-
quired.
 Check the brushes for wear, replace if
required.
 Charge battery if required.
 Check battery pole for oxidation; brush
it if required and lubricate it using pole
grease. Ensure that the connection ca-
ble sits firmly.

Check the condition of the seals be-
tween dirt water reservoir and cover, re-
place if required.
 Check the acid density of the cells if the
batteries are not maintenance-free bat-
teries.
 Have the prescribed inspection carried
out by the customer service.
 Remove the vacuum bar.
 Unscrew the star grips.

Remove the plastic parts.
 Remove the vacuum lips.
 Turn the vacuum lips or insert new
ones.
 Insert the plastic parts.
 Screw in and tighten the star grips.
 Release the wing nuts.
 Remove bearing lid.
 Take out both the brush rollers, insert
new ones (follow the six-edge posi-
tions).
Maintenance and care
Maintenance schedule
After the work
Monthly
Yearly
Maintenance Works
Turn or replace vacuum lips
Replacing the brush rollers
28 EN