manualshive.com logo in svg

Kaon KVR-1000, Manual

Share
Download
Kaon KVR-1000 Manual Download Page 8

16

1

2

3

4

5

6

7

?

2.4 Connecting and Installation

How to connect the receiver to various other systems

There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi
SYSTEM. Consult your local supplier for assistance in setting-up your system that is
best suited to your requirements.

1. Connect the receiver to a TV set

Connect the receiver to a TV set with SCART, if your TV set is equipped for it.
Alternatively you can use A/V, TV out (UHF) or S/Video jacks.

2. Connect the receiver to a VCR

Connect the SCART jack from the VCR to the back of the receiver.
Alternatively you can use A/V, TV out (UHF) or S/Video jacks.

3. Connect the receiver to a Hi-Fi System

Connect a RCA stereo cable from the AUDIO L/R jacks, S/PDIF on the receiver to
the LINE, AUX, SPARE or EXTRA input jacks on your Hi-Fi System.

4. Connect the receiver to a Digital Audio System

If you have a DAC with S/PDIF coaxial cable input, you can connect the receiver with
it to enjoy higher quality sound. Connect S/PDIF coaxial cable to a digital amplifier.

15

2.3 Rear Panel

No.

Button

Functions

1

POWER SUPPLY

AC 90-250V, 50/60Hz, 55W(maximum)

2

POWER SWITCH

To provide power to the main unit

3

LNB

To connect to a satellite antenna and cable jacks.

4

LOOP THROUGH

To connect an RF signal from the receiver either to the RF input jack
on your television or to the receiver.

5

RS-232

To connect to a personal computer for software upgrade.

6

SCART FOR VCR

To connect this port to the VCR via a SCART cable.

7

SCART FOR TV

To connect this port to the TV via a SCART cable.

8

RF LOOP IN

To connect  a general aerial antenna and cable jacks to an RF input
jackon the rear of the receiver.

9

TV OUT

To connect a TV via a coaxial cable.

10

MODEM

Option

11

S/PDIF

Output for connection to a digital amplifier (Coaxial).

12

VIDEO

Video connection port to the TV or other equipment.

13

AUDIO

Audio connection port to the TV or other equipment.

14

S-VIDEO

Video connection port to a TV or other equipment via SUPER
VIDEO.

15

S/PDIF

Output for connection to a digital amplifier (Optical).

16

VIDEO

Video that connects to the Analog PVR

17

AUDIO

Audio that connects to the Analog PVR

18

VIDEO

Video that connects to the DVR

19

AUDIO

Audio that connects to the DVR 

20

ETHERNET

Connects to the Internet ISP Network

Summary of Contents for KVR-1000






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands