92
1
2
3
4
5
6
7
?
Connect this product directly to a PC
Connect the product to a PC using a LAN cable.
Connect this product to a PC via a HUB
Connect this product to a PC via a HUB using LAN.
Target Wizard Login
91
2
Target Wizard
Using the Target Wizard, you can change the RMCS value in the network. The
setting value changed using Target Wizard will be stored in the RMCS.
The connection between the PC and the RMCS has to be made on the same
network as in the two following cases. The Target Wizard is divided into 4 parts; the
left server display part, the top setting item part, the center value setting part and
the buttons at the bottom. Below is the initial Target Wizard screen. The MAC
address of the RMCS currently connected to the network is displayed to the left of
the server display.
• When a specific port is closed, due to a firewall or a
personal firewall program for example, the MAC
address may not be displayed. In this case, open the
data transmission port setting (UDP : 12344) of the
Target Wizard.
If you select the MAC address of the
server you want to set, the following
window will appear for you to enter
the admin ID and password.
Enter the Admin ID and password
and click the OK button. The default
value is as follows;
ID: root
Password : pass
When the correct ID and password is
entered, the network setting value
display screen will activate as shown
below.
Summary of Contents for KVR-1000
Page 35: ...70 1 2 3 4 5 6 7 69 ...
