80
1
2
3
4
5
6
7
?
79
Items
Descriptions
Upgrade Port
Sets the port to which upgrade data will be transmitted. Port setting is used
for the various network configurations including avoiding a firewall-built in
the network or a specific port.
HTTP Port
Sets the port to which the file is transmitted from the receiver on Internet
Explorer. Port setting is used for the various network configurations
including avoiding a firewall-built in the network or a specific port.
Server Domain
If the IP Type is set to DHCP or PPPoE, the domain name displayed in the
Server Domain can be automatically registered to the DDNS server installed
in our company. You can connect to the receiver with this domain name,.
You can enter the domain address on the address bar.
• Since there is the registered port number for TCP
Port or HTTP Port setting, do not set the number
yourself, but use the default number. In the case of
a network environment using a router, enter the
appropriate number.
3
Network Setting
If you click the
Network
tab in
Properties
in
Admin Mode
the following screen will
appear. It helps you to set the general settings. If the network setting is not
accomplished properly you cannot set the receiver setting on the web and transmit
screens via Internet Explorer. Therefore be sure that you enter the following
information referring to the network administrator. If you want to adopt the setting
into the receiver, you should click the
Save
button.
Items
Descriptions
IP Type
Static : Select when the network configuration of the receiver is static IP
(Public IP or Private IP)
DHCP : Select when the network configuration of the receiver is DHCP.
PPPoE : Select when the network configuration of the receiver is PPPoE.
Server Name
Sets the name of the receiver. The name of the receiver is displayed on the
top-left of the screen when connecting via Internet Explorer.
IP Address
Enters the IP address. You should enter the IP address on the address bar
of Internet Explorer when you see the image transmitting via Internet
Explorer.
Subnet Mask
Enters the Subnet Mask.
Gateway
Enters the Gateway.
DNS Server
Enters the DNS Server address. The DNS Server connects the receiver to
the DDNS Server installed in our company when operating with DHCP or
PPPoE. You should enter the DNS Server address when operating with
DHCP or PPPoE. Using the default value is recommended.
TCP Port
Sets the port to which the image is transmitted from the receiver on Internet
Explorer. Port setting is used for the various network configurations,
including avoiding a firewall-built in the network or a specific port.
Summary of Contents for KVR-1000
Page 35: ...70 1 2 3 4 5 6 7 69 ...
